Click to enlarge
Home » Unmanned System Products » MASS-18 Universal Echo Precision Delay Module (Miniature Universal Continuous Simulation)
MASS-15 Continuous Echo Simulation Excitation System of Radio Altimeter
Back to products
MASS-21 Echo Simulator of Radio Altimeter

MASS-18 Universal Echo Precision Delay Module (Miniature Universal Continuous Simulation)

The MASS-18 Universal Echo Precision Delay Module, characterized by its miniature design and universal continuous simulation capability, is a high-precision component engineered for precise echo signal delay adjustment in radio frequency (RF) testing scenarios. It specializes in delivering accurate, customizable delay for echo signals across a broad frequency range, making it compatible with diverse RF devices—including radio altimeters, surveillance radars, and communication systems—that require reliable echo signal simulation. Its compact form factor allows easy integration into space-constrained test setups, while the universal continuous simulation function ensures consistent replication of real-world signal delay conditions (such as those caused by varying altitudes or distances). By enabling precise control over echo delay, the module plays a critical role in verifying key performance metrics of target devices, such as signal capture accuracy, delay response, and data processing reliability, thereby supporting the development, calibration, and quality assurance of high-performance RF equipment with flexibility and precision.​
Categories: , , , ,
Description

Product Description

  • Working center frequency: 4.3GHz, 4.2GHz optional;
  • Maximum allowable bandwidth: 250MHz (- 3dB bandwidth);
  • It has straight separation function;
  • Maximum allowable input power: 26dBm;
  • Simulation height range: continuous: 0.4-15000m;
  • Simulation height resolution: 0.5m;
  • Simulation height accuracy: ±(0.2+0.002×H)m;
  • Height change speed: – 500~500m/S;
  • Height switching time: no more than 1ms (excluding communication and analysis time);
  • In band fluctuation: ± 1dB;
  • Minimum attenuation of circuit: no more than 40dB;
  • Maximum attenuation of circuit: not less than 100dB;
  • Control mode: RS422 serial port control;
  • Working temperature: -40℃～+60℃;
  • Storage temperature: -55℃～70℃.
  • Volume and weight: the standard size of chassis is 233×160×52mm, no more than 2.5kg;
  • The working power supply is DC23～32V, and the power consumption is not more than 20W.

Related products

MDG-200 Radio Altimeter

The MDG-200 radio height-setting device operates in the C-band and adopts a monopulse working system. Its sensitive component is of the heterodyne type, and the circulator at the antenna terminal uses a transceiver common-mode configuration. Prior to missile launch, the height-setting device needs to be powered on; it then performs a self-check and completes height setting via the communication interface. After the missile is launched, the radio frequency (RF) module is activated, and a gate is set based on the preconfigured height. When the preset height is reached, the device outputs height-setting command information and telemetry data. The MDG-200 height-setting device features mature technology: the monopulse design enhances the altimeter’s height measurement performance, and the device also has the characteristic of not being affected by the carrier’s speed.

Subminiature Radio Altimeter MY-70B

The MY-70B radio altimeter is a solid-state C-band radio altimeter system based on frequency-modulated continuous wave (FMCW) technology, characterized by constant beat frequency and closed-loop tracking measurement. It maintains a constant beat frequency by servo-controlling the slope of the sawtooth wave that modulates the microwave oscillator, thereby achieving automatic altitude tracking. Under the condition of constant beat frequency, the measured altitude is proportional to the modulation period; thus, altitude information can be obtained by measuring the modulation period, and the system then converts this information into an altitude voltage for output. The MY-70B altimeter possesses excellent anti-jamming performance, owing to its adoption of a narrow-band receiver (with gain adjustable according to altitude) as well as technologies including equivalent spectrum front-end detection, weighted frequency identification, and automatic servo tracking. In terms of component design, its high-frequency components implement microwave integration while its low-frequency components adopt a modular design—these measures collectively enhance the product’s reliability, anti-interference capability, and electromagnetic compatibility. Additionally, the MY-70B altimeter uses RS422 and CAN protocols for its interface output, which further improves the reliability of the product’s data transmission.

MY-5001B Radio Altimeter for Sea Condition Identification

The MY-5001B radio altimeter is an all-solid-state C-band device featuring a frequency-modulated continuous wave (FM-CW) system, a constant differential beat frequency, and a closed-loop tracking and measurement mechanism. It ensures a constant beat frequency through servo control of the slope of the sawtooth wave that modulates the microwave oscillator, thereby achieving automatic height tracking. This altimeter incorporates a suite of advanced technologies, including narrowband reception, weighted frequency discrimination, equivalent spectrum leading edge detection, gain PID control, instantaneous sensitivity compensation, temperature compensation, horizon frequency selection design, and power silence. These technologies collectively endow it with advantages such as accurate height measurement, stable tracking, adaptability to various terrains, a wide height measurement range, high precision, and strong anti-interference capabilities.

Radio Altimeter MY-3001M

The MY-3001m radio altimeter is a radar altimeter developed for the Rainbow XX UAV by a specific institute. It is widely used in UAVs to measure the altitude relative to the sea surface or the ground. This altimeter incorporates a linear modulation coefficient technology adaptable to altitude changes and a narrow-band receiving technology for echo signals, which enhances the product’s resistance to active interference. It also adopts coherent local oscillator mixing, delivering superior performance in resisting synchronous interference, and employs echo signal spectrum front-edge detection technology to improve tracking accuracy. Additionally, it features a three-dimensional design based on serialization, standardization, and modularization, endowing the product with excellent inheritance, maturity, and reliability. While retaining the closed-loop tracking system, the MY-3001m radio altimeter further adopts digital control technology, microwave integration technology, and hybrid integration technology to achieve product modularization. Moreover, its receiver is equipped with dual filters, which further boosts the product’s anti-interference capability.

Small Radio Altimeter MY-28A、MY-24(XXX-28A、XXX-24)

The MY-28A and MY-24 (also designated as XXX-28A and XXX-24) are miniaturized C-band full-function radio altimeters that comply with aerospace standards. Serving as key components for the control of the longitudinal altitude channel, they are specifically designed for a certain type of UAV target. These altimeters possess excellent anti-interference performance and electromagnetic compatibility, enabling them to accurately measure altitude relative to the sea surface or the ground.
The MY-28A and MY-24 are developed following the three core design principles of serialization, standardization, and modularization. This design approach endows the products with strong design inheritance, ensuring they are mature and reliable in operation. To date, these two models of radio altimeters have been widely applied in multiple types of aircraft, with their total deployment quantity exceeding 800 units.

Radio Altimeter MY-3001D

The MY-3001D radio altimeter incorporates two key technologies: a linear modulation coefficient technology that adapts to altitude changes and a narrow-band receiving technology for echo signals, both of which effectively enhance the product’s resistance to active interference. It also adopts coherent local oscillator mixing, granting it superior performance in resisting co-frequency asynchronous interference, and employs echo signal spectrum front-edge detection technology to boost tracking accuracy. In terms of design, the altimeter follows the principles of serialization, standardization, and modularization. While retaining its closed-loop tracking system, it further integrates digital control technology, microwave integration technology, and hybrid integration technology to achieve product modularization. Additionally, it is equipped with a silent function, which further improves the product’s anti-interference capability. This radio altimeter is applicable to cruise missiles and unmanned aerial vehicles (UAVs) for measuring the altitude relative to the sea surface or the ground.

MAST-11 Equivalent Altitude Simulator of Radio Altimeter

The MAST-11 Equivalent Altitude Simulator of Radio Altimeter is a specialized aerospace testing tool engineered to replicate realistic altitude signals for radio altimeter systems. It generates precise, adjustable equivalent altitude data—mimicking terrain-relative height scenarios—to validate the performance, accuracy, and fault response of on-board radio altimeters during pre-flight testing, maintenance, or system calibration. Compliant with stringent aerospace standards, it ensures reliable simulation of low-to-high altitude ranges, supports interference-free signal output, and integrates easily with aircraft test setups, making it essential for verifying radio altimeter functionality across commercial and military aircraft platforms.

MDG-300 Radio Altimeter

The MDG-300 radio height-fixing device operates in the C-band and adopts a pulse compression system. Its sensitive component is of the heterodyne type, and the circulator at the antenna terminal uses a transceiver common-mode design. Prior to missile launch, the height-fixing device is powered on, and it undergoes self-check and height presetting via the communication interface. After the missile is launched, the radio frequency (RF) module is activated, and a gate is set in accordance with the preset height. When the preset height is reached, the device outputs height-fixing command information and telemetry data. The MDG-300 height-fixing device features mature technology: its pulse compression technology can enhance the altimeter’s height measurement performance, and it has the characteristic of a wide height measurement range. Additionally, the digital pulse compression function based on FPGA (Field-Programmable Gate Array) endows it with advantages such as small size, low power consumption, and low cost.