Click to enlarge
Home » Unmanned System Products » MFS-01A Radar Signal Emitter Simulator
M027B Transmitter Low Power Bidirectional Digital Integrated Transmitter
Back to products
MYD-C33 Multiple Bandwidth Allocations & Star Networking

MFS-01A Radar Signal Emitter Simulator

The Seeker Simulation Radiation Source is designed to replicate the microwave radiation signal characteristics of aircraft-borne radar seekers, and provides simulated radar signals as intercepted and tracked targets for various warning devices. The Seeker Simulation Radiation Source developed by our company features controllable power, flexible system configuration, a wide frequency band, small size, light weight, ease of use, and no preheating requirement. It can be integrated with various test equipment and serve as a payload for UAV (Unmanned Aerial Vehicle) targets. Its signal modulation modes can cover the typical operating modes of terminal guidance radars, and the Seeker Simulation Radiation Source can be categorized into non-coherent simulation radiation sources and coherent simulation radiation sources.

Categories: , , , ,
Description

Non Coherent Microwave Radiation Source

  • Signal system: non coherent system;
  • Typical frequency band: Ku band;
  • Polarization mode: vertical polarization;
  • Signal bandwidth: ≥220MHz;
  • Power gain product: ≥48dBw;
  • Pulse width: 0.7μs;
  • Repetition rate: 500~1500hz, can be bound;
  • 3dB beam width of antenna: azimuth ≥±6°, pitch ≥±6°;
  • Weight: no more than 10kg.

MFS-01A Radar Signal Emitter Simulator

MFS-01A Radar Signal Emitter Simulator

 

Coherent Microwave Radiation Source

  • Signal system: coherent system;
  • Typical frequency band: X-band;
  • Polarization mode: vertical polarization;
  • Signal bandwidth: ≥600MHz;
  • Power gain product: ≥36dbw;
  • Pulse width: 5~40μs, bindable;
  • Repetition rate: 500~2500Hz, can be bound;
  • 3dB beam width of antenna: azimuth ≥±25°, pitch ≥±25°;
  • Weight: no more than 5kg.

 

MFS-01A Radar Signal Emitter Simulator

MFS-01A Radar Signal Emitter Simulator

Related products

MDG-300 Radio Altimeter

The MDG-300 radio height-fixing device operates in the C-band and adopts a pulse compression system. Its sensitive component is of the heterodyne type, and the circulator at the antenna terminal uses a transceiver common-mode design. Prior to missile launch, the height-fixing device is powered on, and it undergoes self-check and height presetting via the communication interface. After the missile is launched, the radio frequency (RF) module is activated, and a gate is set in accordance with the preset height. When the preset height is reached, the device outputs height-fixing command information and telemetry data. The MDG-300 height-fixing device features mature technology: its pulse compression technology can enhance the altimeter’s height measurement performance, and it has the characteristic of a wide height measurement range. Additionally, the digital pulse compression function based on FPGA (Field-Programmable Gate Array) endows it with advantages such as small size, low power consumption, and low cost.

MASS-03 Radio Altimeter Continuous Echo Signal Simulator

The MASS-03 Radio Altimeter Continuous Echo Signal Simulator is a specialized testing device designed to generate stable, continuous echo signals that replicate real-world altitude-related signal environments for radio altimeters. Tailored to support the development, calibration, and performance verification of radio altimeters, it accurately simulates various echo signal characteristics (such as amplitude, frequency, and delay) corresponding to different altitude scenarios, enabling users to test critical functions of radio altimeters—including height measurement accuracy, tracking stability, and anti-interference performance—under controlled laboratory conditions. By providing reliable, repeatable continuous echo signals, the simulator eliminates the need for costly and complex field tests, streamlining the testing process while ensuring radio altimeters meet design specifications for accuracy, stability, and robustness in practical operation.

MY-70D Anti Jamming Radio Altimeter

Operating in the C-band, the MY-70D radio altimeter employs a frequency-modulated continuous wave (FMCW) operating system and incorporates closed-loop tracking measurement technology, equipping it with the capability to resist same-frequency asynchronous interference. This ensures that when multiple aircraft take off and fly simultaneously, their altimeters do not interfere with one another. To achieve resistance against active interference, the altimeter adopts a range of measures, including anti-blocking, anti-burnout, power control, beam control, frequency agility, and frequency modulation (FM) technology. Furthermore, it features silent power supply control for its microwave components; its antenna is fitted with a band-pass filter, and a customized radome with frequency-selective functionality is utilized—these design elements enable the altimeter to achieve a wave transmission rate of ≥85% for the operating frequency within the band and less than 10% for out-of-band frequencies, thereby realizing stealth capabilities.

MASS-06 Continuous Echo Simulation Excitation System of Radio Altimeter

The MASS-06 Echo Signal Simulation Excitation System, hereinafter referred to as the "Simulation Excitation Source", is a dedicated equipment designed for the hardware-in-the-loop (HIL) simulation of radio altimeters. It serves as a key component in replicating real-world echo signal scenarios, providing targeted excitation signals that enable the radio altimeter to operate under simulated physical conditions—effectively bridging the gap between theoretical testing and actual operational environments to validate the altimeter’s performance, responsiveness, and reliability.

Small Radio Altimeter MY-28A、MY-24(XXX-28A、XXX-24)

The MY-28A and MY-24 (also designated as XXX-28A and XXX-24) are miniaturized C-band full-function radio altimeters that comply with aerospace standards. Serving as key components for the control of the longitudinal altitude channel, they are specifically designed for a certain type of UAV target. These altimeters possess excellent anti-interference performance and electromagnetic compatibility, enabling them to accurately measure altitude relative to the sea surface or the ground.
The MY-28A and MY-24 are developed following the three core design principles of serialization, standardization, and modularization. This design approach endows the products with strong design inheritance, ensuring they are mature and reliable in operation. To date, these two models of radio altimeters have been widely applied in multiple types of aircraft, with their total deployment quantity exceeding 800 units.

Radio Altimeter MY-3001M

The MY-3001m radio altimeter is a radar altimeter developed for the Rainbow XX UAV by a specific institute. It is widely used in UAVs to measure the altitude relative to the sea surface or the ground. This altimeter incorporates a linear modulation coefficient technology adaptable to altitude changes and a narrow-band receiving technology for echo signals, which enhances the product’s resistance to active interference. It also adopts coherent local oscillator mixing, delivering superior performance in resisting synchronous interference, and employs echo signal spectrum front-edge detection technology to improve tracking accuracy. Additionally, it features a three-dimensional design based on serialization, standardization, and modularization, endowing the product with excellent inheritance, maturity, and reliability. While retaining the closed-loop tracking system, the MY-3001m radio altimeter further adopts digital control technology, microwave integration technology, and hybrid integration technology to achieve product modularization. Moreover, its receiver is equipped with dual filters, which further boosts the product’s anti-interference capability.

Radio Altimeter MY-3001D

The MY-3001D radio altimeter incorporates two key technologies: a linear modulation coefficient technology that adapts to altitude changes and a narrow-band receiving technology for echo signals, both of which effectively enhance the product’s resistance to active interference. It also adopts coherent local oscillator mixing, granting it superior performance in resisting co-frequency asynchronous interference, and employs echo signal spectrum front-edge detection technology to boost tracking accuracy. In terms of design, the altimeter follows the principles of serialization, standardization, and modularization. While retaining its closed-loop tracking system, it further integrates digital control technology, microwave integration technology, and hybrid integration technology to achieve product modularization. Additionally, it is equipped with a silent function, which further improves the product’s anti-interference capability. This radio altimeter is applicable to cruise missiles and unmanned aerial vehicles (UAVs) for measuring the altitude relative to the sea surface or the ground.

Mini Radio Altimeter MY-4001

The MY-4001 series altimeter represents the latest generation of radar altimeters. While complying with aerospace standards, it boasts an extremely compact size, with external dimensions measuring a mere 86mm × 52mm × 25mm. As a full-featured radio altimeter, the MY-4001 serves as a core component for the control of the longitudinal altitude channel. It finds wide application in flying missiles and unmanned aerial vehicles (UAVs) to measure altitude relative to the sea surface or ground.
Employing a linear frequency-modulated continuous wave (LFMCW) measurement system, the MY-4001 exhibits outstanding characteristics, including high precision, strong anti-interference capability, excellent battery compatibility, and stable, reliable operation. These attributes make it particularly well-suited for radar altitude measurement in ultra-light and ultra-small aircraft. For interface output, it adopts RS422 and CAN protocols, which effectively enhances the reliability of the product's data transmission.