Product Detail
Professional 3-axis High-precise FOC Program
The M10E is a dedicated gimbal engineered for 10X zoom cameras, specifically tailored to support drone-based aerial tasks such as inspection, surveillance, and search-and-rescue missions.
It integrates two key components: a high-definition (HD) 10X optical zoom camera and a 3-axis high-stability gimbal. This setup enables the capture and recording of 1080p video at 30fps, with footage stored directly to an on-board TF card—delivering a steady “eye in the sky” view. Control flexibility is a standout feature: operation can be managed either by the drone pilot or a secondary individual, allowing for quick and effective overhead coverage of large ground areas.
A key advantage of the M10E lies in its 10X zoom function: it lets users maintain a safe, distant position while still zooming in closely on any object or area that demands focused attention.
10x Optical Zoom Camera
The M10E gimbal and camera are equipped with a 10x optical zoom lens, paired with a 1/3-inch CMOS sensor module. This setup supports approximately 2.48 million effective pixels, along with an ultra-low color illumination of 0.05lux@F1.6—ensuring clear display of image details even in poorly lit environments. Additionally, it boasts a wide dynamic range of 105dB, which enables simultaneous capture of details in both over-bright and over-dark areas when facing backlight or strong light conditions.
Featuring 2.48 million effective pixels, the M10E also supports 10x optical autofocus and HD 1080P video recording. Tailored for UAV aerial photography, it incorporates a fast-focus algorithm optimized for aerial characteristics, achieving a focus time of less than 1 second.
IP Output with 360 degrees continuous
The M10E supports IP output with 360-degree continuous functionality. By default, the resolution for its IP output is set to 720P.
Multi Control Methods
Default PWM, TTL Serial Port, and TCP control are supported, plus optional SBUS. Use Viewpro’s Viewlink software to enable TTL control.
Compatible with Viewport
he M10E is compatible with Viewpro’s quick-release connector, Viewport. Viewport is an optional component, featuring easy assembly and plug-and-play functionality.
Dimensions
Specifications
| Hardware Parameter | |
| Working voltage | 16V |
| Input voltage | 4S ~ 6S (16V – 24V) |
| Output voltage | 5V (connect with PWM) |
| Dynamic current | 150~700mA @ 16V |
| Working environment temp. | -20℃ ~ +60℃ |
| Output | IP (RTSP 720p/1080P 25fps) |
| Local-storage | SD card (Up to 256G,class 10, FAT32) |
| Photo storage format | JPG(1920*1080/1280*720) |
| Video storage format | MP4 (1080P 25fps) |
| Card reading online | HTTP read pictures |
| Control method | PWM / TTL / S.BUS / TCP/UDP(IP output version) |
| Geotagging | Not support |
| Gimbal Spec | |
| Mechanical Range | Pitch/Tilt: ±105°, Roll: ±70°, Yaw/Pan: ±360°*N (IP output version) |
| Controllable Range | Pitch/Tilt: -45°～90°, Yaw/Pan: ±360°*N (IP output version) |
| Vibration angle | Pitch/Roll: ±0.02°, Yaw：±0.02° |
| One-key to center | √ |
| Camera Spec | |
| Imager Sensor | 1/2.8″ CMOS Sensor |
| Total pixel | 2.48M |
| Picture quality | Full HD 1080 (1920*1080) |
| Optical zoom | 10x, f = 4.9mm ~ 49mm |
| Digital zoom | No |
| Angle of View (Horizontal) | 53.2°(Wide end) ~ 5.65° (Tele end) |
| Sync system | PAL/NTSC; Progressive Scan |
| S/N ratio | more than 50dB |
| Min illumination | Color : 0.002 lux@F1.2 BW: 0.001lux@F1.2 |
| Day&Night Mode Switch | ICR filter type |
| White balance | Auto / One Push / Manual / Indoor / Outdoor |
| Shutter speed | Auto / Manual (1/5 ~ 1/50,000 sec) |
| Focus | Auto / One Push / Manual |
| Packing Information | |
| N.W. | 506g / 560g (Viewport version) |
| Product meas. | 91.6*111.4*143.1mm (including control box) / 91.6*111.4*148.8mm(Viewport Version) |
| Accessories | 1pc gimbal camera device, screws, USB to TTL cable / Hight quality box with foam cushion |
| G.W. | 860g |
| Package meas. | 200*200*150mm |
